ABSTRACT
This project is concerned write the
identification of those defects that are found in most of the drawing tables in
the Mechanical Engineering drawing studio.
The report investigates the possible
ways through which the mentioned above can be brought back to normal standard
for usage ins the department.
Defects comes up due to inability to
renovate and also inability of proper usage.
There may be scratches over the table
top, breakage in the legs joining or even breakages in the joints found before
the tabletop. Before renovating, the
location of the symptom and the kind of materials involved are put into
consideration.
At the end of the every defect, the
renovation of that actual defect is discussed in this project.
TABLE
OF CONTENTS
Title
page
Letter of transmittal
Release page
Approval page
Dedication
Acknowledgement
Abstract
Table of contents
CHAPTER ONE
1.0 introduction
1.1
Aim of the project
1.2
Objectives of the project
1.3
Scope of the study
CHAPTER TWO
2.0 literature review
CHAPTER THREE
3.0
Specification of problems
3.1 history and background of information
3.2
Condition of use
3.3
Characteristics
3.4
Appearance (aesthetic)
3.5
Performance
3.6
Reliability and life
CHAPTER FOUR
4.0 material selection
CHAPTER FIVE
5.0 construction details
CHAPTER SIX
6.0 cost analysis
6.1
Material cost
6.2
Labour cost
6.3
Miscellaneous cost
6.4
Market cost
6.5
Market cost of product (over all)
CHAPTER SEVEN
7.0 testing and evaluation
CHAPTER EIGHT
8.0 recommendation
8.1
Conclusion
8.2
Bibliographical references
8.3
Working diagrams
CHAPTER
ONE
INTRODUCTION
The term refurbishing has been defined
in many ways by many experts from both building, and furniture perspective.
The oxford advance learners dictionary
definition of refurbishing is the widely and a generally accepted definition of
refurbishing.
It defines refurbishing as the work
embark or undertaken in order to clean and decorate a room, building or in
order to make it more attractive and more useful. This simply means a programme transformation
of a particular place or thing at a point in time.
The drawing studio requires special
consideration to preserve the original studio nature after it has deteriorated,
and repair work at different period must be considered when the new defects are
first discovered, when this is being considered recently, it can serve as a
remedy towards breakage of tables and the deterioration of the studio.
These may be wrongly diagnosed,
consequently, the remedies for refurbishing prescribed the drawing studio may
fall and further experience and investigation leads to effective remedies or
maintenance strategies.
Refurbishing is sub divided into three
types and these are
1. Life style refurbishing: This
involves improving a home and a way of life.
It might involve building a sunroom for pleasure or converting unused
attic space into living quarters to meet ones changing needs.
2. Retroit Projects Refurbishing: This
usually focuses on home shells or mechanical systems such as
i.
Upgrading
an insulation system
ii.
Putting
on new siding
iii.
Replacing
a furnace
3. Maintenance and Repair Refurbishing: This
project the investment found in a house, workshop, or a room through activities
such as:
i.
Repair
of furniture
ii.
Caulking
windows
iii.
Reshingling
roofs
iv.
Replacing
equestronughs
AIM OF THE PROJECT
The basic aim of this project is to
identify the importance of refurbishing in our institutions of higher learning,
and also to know the correct types to be used at any point in time.
OBJECTIVE OF THE PROJECT
The objectives of the project are as follow
1.
To
know the importance or refurbishing
2.
To
improve the understanding rate of the users of the project, by making them feel
comfortable whenever there are in the drawing studio.
3.
To
help bring back to the departmental acceptance of the standard of the drawing
studio.
SCOPE
OF THE STUDY
This
project “Refurbishing of the Mechanical Engineering Drawing Studio.
This project is further limited to the
Mechanical Engineering Drawing Studio, which might equally serve as a case
study. And because of this, we will only
consider here, the refurbishing of the Mechanical Engineering Drawing Studio.
Get the Complete Project Material Now!!!
